HP Deskjet 2633 Printer not Connecting to Wi-Fi

How to Fix HP Deskjet 2633 Printer not Connecting to Wi-Fi

Do you face certain issues with connecting to the Wi-Fi during your print process? It’s quite common and can be rectified using the below step-wise. Once you have rectified the reason for your uninterrupted network which causes this type of error on your HP Deskjet 2633 printer, try to use the below steps for the problem-free printing procedure.

Before committing the below directives, you must ensure the internet connectivity for its stability and range of a signal.

  1. First, you have to ensure whether the printer and its parts are connected & configured properly with reference to the HP manual given.
  2. Yet, you didn’t register to your HP Account, attempt to register the printer using the HP account. Then, support through the HP Official page reference.
  3. It’s a Wi-Fi not connecting error, so attempt the Network configuration test page and inspect whether has sufficient paper sheets for the input paper tray.
  4. If not done, you need to load the quality & recommended size paper sheets to proceed next.
  5. Make sure the printer is not under the offline issues or other sleep modes. If seen, take the HP Manual and go to the appropriate settings to change the printer status.
  6. Further, operate through the Printer’s control panel settings to choose the required setup or wireless menu to bring the network-related settings.
  7. Then, utilize the settings and attempt to clear all the print queues carefully with your knowledge.
  8. Next, you have to Reboot the HP printer & system devices.
  9. If you happen to receive any update notifications, try to use update the Firmware using the stable network.
  10. Make use of the network settings and mention the needed network credentials like user ID & password.
  11. Ensure whether the printer’s basic connections are appropriate and make sure with the chosen options to move on next.
  12. Further, you have to type the required network credentials correctly to the stated field.
  13. Tip: Remove the visible signal blocking objects in between the printer & wireless router and place the router nearby the printer for efficient access.
  14. Attempt the power cycle method properly and inspect the active printer network status.
  15. Or else, you have to Restart the complete printer setup and initiate the print task once the HP Printer is back in the active state.
  16. On the other hand, use the wireless methods using the needed network settings and continue with the print sample work.
  17. Assign the print job, If you face any issues-Call Our Technical Team for instant support & guidance.

Leave a Reply

Your email address will not be published.